Jump to content

1Phils

Members
  • Posts

    19
  • Joined

  • Last visited

About 1Phils

  • Birthday 11/07/1957

Information

  • Aircraft
    Savannah
  • Location
    Mackay
  • Country
    Australia

1Phils's Achievements

Member

Member (1/3)

  1. 1Phils

    Air box hot

    I have the same setup and yes it runs hot but it doesn't affect the operation of the motor.
  2. Yes but they only balance at set revs so balance for cruise or full throttle and either will not be in balance at either revs.
  3. Hi Allan is the Rotax 100uls engine still available? Phil.
  4. Hi Rippler is the Rotax 100uls engine still available? Phil.
  5. Hi Deadstick is the Rotax 100uls 2,000hr engine still available? Phil.
  6. Hi geoffreywh is the Rotax 100uls 2,000hr engine still available? Phil.
    1. geoffreywh

      geoffreywh

      no. that went months ago
  7. Hi, I found during a carb synchronization that adjusting the idle mixture screws to the factory specs made my engine run a bit cooler. If you fly high maybe checking the idle mixture screws will sort it out. How to do this is shown on the rotax site under carb synchronization. Phil.
  8. Hi Hasse, The spring has held its shape for over 12 months so far. I don't think that the metal is soft you just reset it back into the unrested shape.. Phil.
  9. Been accepted thanks anyway.
  10. Sorry Kyle My facebook name is Philip Sims
  11. Hi Hasse, I bent my main spring in the middle with a press and took it over centre until the axels are slightly pointing down so when the plane is sitting on the wheels they are sitting straight up and down not splayed out. Phil.
  12. Hi Kyle, I tried to find the Sav club on facebook but I cant find it. Is there a specific name for it? Phil.
  13. On Win7 you have a pair of red scissors that you can use to snip a part or the whole page and then save it.Phil
  14. Hi Lyndon, Do you know the model or id for the Balwin filter that fite a rotax 100uls please? Phil.
×
×
  • Create New...