The Zlin Z-50 is an aerobatic sports airplane built by the Czechoslovakian company Zlin Aircraft. In autumn 1973 it was decided in Moravan Otrokovice to develop a new single seat aerobatic airplane. The design team was headed by Jan Mikula, a noted Czech designer. During the design phase, computer optimization was used to achieve the desired aerodynamic characteristics. The principal goal was to determine the optimum engine and propeller combination for this aircraft. Designers settled on the Lycoming AIO-540 D4B5 horizontally-opposed six-cylinder piston engine, rated at 194 kW (260 hp), driving a three-blade Hoffmann constant speed propeller. The prototype Zlín Z-50L (L for its Lycoming engine), with civil registration OK-070, first flew 18 months after the start of design work, on 18 July 1975. The first flights were successful. The Z-50L is a cantilever low-winged single-engined monoplane with a fixed tailwheel undercarriage. Unlike the Zlín Z 26 series which it replaced, the Z-50 was of all-metal construction, with limit maneuvering load factors of +9.0 and -6.0. It does not incorporate landing flaps; in their place, two-section ailerons extend the full wingspan, providing an exceptional rate of roll. The designers made ample provision for trimming: automatic trim tabs are used on the inboard aileron sections; on one of the elevators and on the fabric-covered rudder; one outboard aileron has a ground-adjustable trim tab; the elevator has a trim tab which can be adjusted in-flight. The standard fuel capacity can be supplemented by wingtip auxiliary tanks for ferry flights. The full-vision bubble canopy can be jettisoned in-flight if necessary. The Zlín Z-50 made its competition debut at the 1976 World Aerobatic Championships, being flown by both the Czechoslovak and Polish teams, with a Czechoslovak Z-50 finishing in third place (behind two Soviet-flown Yakovlev Yak-50s), while the Czechoslovak team finished in second place in the team competition. In the 1978 championships, the Zlín was more successful, with Czech-flown Z-50s finishing first and third in the individual competition, and a German-flown Zlín finishing fourth, with the Czechoslovak team winning the team competition. Zlín Z-50s finished fourth in the 1980 championship, and third in the 1982 competition. The Zlin Z-50LS, with a more powerful Lycoming AEIO-540 L1B5D engine of 224 kW (300 HP), was first flown by Zdenek Polasek on 29 July 1981. The more powerful engine enhanced vertical maneuvers. The Zlin Z-50LS can fly at 760 kg gross weight in the aerobatic category (+8g to –6g). Many Z-50L and LA versions were rebuilt to Z-50LS standard in the early 1980s. Variants Z-50L First production variant with a Lycoming AEIO-540-D4B5 engine, certified in 1977, conversion to 50LA and 50LS variants, 25 built. (0001-0025) Z-50LA Variant certified in 1980, five built and 18 conversions from Z-50L. Z-50LS Variant certified in 1982 with a Lycoming AEIO-540-L1B5D engine, 34 built and 18 converted from Z-50, one aircraft was rebuilt as a Z-50M and two as Z-50LX. Z-50LX Variant certified in 1991 with a Lycoming AEIO-540-L1B5D engine, nine built with two converted from Z-50LS, two were rebuilt as Z-50LS. Z-50M Variant certified in 1989 with a LOM M 137 AZ engine, six built and one conversion.
