The Skyeton Swift is a conventionally laid out single-engine, high-wing light aircraft with side-by-side seating for two. The wings have constant chord, each braced with a single lift strut to the lower fuselage longeron. They use a single metal spar and have stressed skin metal upper surfaces and leading edges, combined with fabric covered lower surfaces aft of the spar. Fabric covered ailerons and inboard slotted flaps together occupy the whole of the wing trailing edges. The wings carry 2.17° dihedral. The Swift's fuselage is built around four welded steel longerons and skinned with composite materials. Behind the cabin the fuselage diameter decreases markedly to the tail. The fin leading edge and the rudder hinge are both strongly swept but the trailing edge of the rudder, which carries an electrically operated trim tab, is only slightly swept. The tailplane and single piece elevator, also tabbed, are set well back, with the tailplane leading edge behind the rudder hinge. A small triangular underfin provides more vertical stabilizer area. A fixed tricycle undercarriage is mounted on the lower fuselage with cantilever legs. The wheels are spatted and the nosewheel steerable. The Swift can be fitted with one of two Rotax 912 flat-four engines: the 59 kW (79 hp) 912UL or the 74 kW (99 hp) 912ULS. Both engines drive three-bladed propellers. Eight Swifts are on the Ukrainian civil register, one on the Russia and six more on the French register. One Swift has been manufactured in the US by SkyetonAmerica of Bettendorf, Iowa.