The Reggiane Re.2000 Falco I was an Italian all metal, low-wing monoplane developed and manufactured by aircraft company Reggiane. The type was used by the Regia Aeronautica (Italian Air Force) and the Swedish Air Force during the first part of the Second World War. The Re 2000 was developed by a team headed by aircraft designers Roberto Longhi and Antonio Alessio to be a lightly-built and highly maneuverable interceptor/fighter aircraft. The emergent design, which had been designated as the Re 2000 Falco I, was equipped with a Curtiss-Wright-style retractable undercarriage, bore substantial similarities to the American-built Seversky P-35. On 24 May 1939, the prototype performed its maiden flight. Flight testing of the prototype revealed it to be able to outfight several significant combat aircraft of the time, including even the more modern Macchi C 200 and the German Messerschmitt Bf 109E fighters. During the run up to and following the outbreak of the Second World War, the aircraft was ordered by several nations, including the Hungarian, Swedish, British and Italian governments. Upon entering squadron service, the Re 2000 soon proved to be a technically advanced aircraft, being well balanced and extremely aerodynamic during flight, but was not without its faults. Although the aircraft was potentially superior to Italian contemporary fighters (Fiat G 50 and Macchi C 200), the Re 2000 was not considered to be satisfactory by Italian military authorities. Consequently, the manufacturer built the type for export and almost all of the first production served with the Swedish Air Force and Hungarian Air Force, rather than in the Regia Aeronautica. The Re.2000 served as the starting point for several derivatives, including the MÁVAG Héja, Reggiane Re.2001, Re.2002, Re.2003, Re.2004, Re.2005, Re.2006 and Re.2007 combat aircraft. The Reggiane Re.2000 is an Italian all metal, low-wing monoplane fighter aircraft. It is the first aircraft to be designed by Reggiane to employ aluminum stressed skin construction, as opposed to the wooden or mixed wood and metal structures that had been traditionally used in contemporary Italian aircraft such as the Savoia-Marchetti SM.79 (which had been previously produced by Reggiane under license). The stressed skin fuselage was highly streamlined, save for the protrusions of the hard-rivetted finish. The majority of the aircraft's exterior, including the tail, was metal-skinned; however, the control surfaces had fabric coverings. The aircraft was furnished with an elliptical wing, the internal structure of which comprised a multi-cell configuration using a total of five spars, stress-skin covering, and integral fuel tanks within the center section. The wing made use of a modified N.38 airfoil section and was outfitted with Frise-type ailerons complete with static and aerodynamic balance, along with a split-continuous flap.[6] The cockpit of the Re.2000 featured a large backwards-sliding canopy; it is claimed that this canopy provided "almost unrestricted all-round visibility". For more extensive details of development, design, operational history and variants, click here. There were five Italian variants with a total of 186 built, and three variants built under licence in Hungary under the name Mavag Héja of which 204 were built.
