Cosmick Posted December 10, 2011 Posted December 10, 2011 The Ops Manual 2.15 - 16 states that the CFI can train in an Aircraft which complies with CAO 95.32 or 95.55, this includes all RAA approved Aircraft. My understanding is that the Plane needed to be factory built or you can be taught in your own approved kit built which YOU assembled 51%+.
Rescuchopper Posted December 10, 2011 Posted December 10, 2011 Cosmick, As someone looking at getting into PPC's with an end to eventually instruct, I am getting into the regs as part of my research into which to buy. The feedback on a PPC forum has suggested that only the Aerochute/Hummerchute is suitable, however: 95.32 doesn't actually state that any of the 4 variations (1.1 Manufactured complete or manufactured kit, 1.2 Special LSA, 1.3 Experimental LSA, or 1.4 51%) are not usable to instruct for reward. The only reference I can find so far is: 95-32 6.1 (b) (iii) states that if it is a 2-place aeroplane, that flying training to obtain a pilot certificate is an acceptable purpose; and 95-32 6.1 (d) states that if being used for training, then the person conducting the training must be an instructor. Is it possible that the RAA/CASA allowed some PPC's to register under 32, but either RAA or CASA placed restrictions on their use with respect to using them as a dual trainer for reward? or are there other regs covering the specific use of the different types? RC 1
Cosmick Posted December 10, 2011 Author Posted December 10, 2011 Hi RC, There is mountains of experience and knowledge in this forum and I am sure the answers are around the corner. I know what I've heard people say over the years as I have mentioned above but just can't find it in writing, it will be there somewhere and someone will pipe up and point it out. Suggest you intro yourself in "Just Landed" state your experience and ambitions.
ahlocks Posted December 10, 2011 Posted December 10, 2011 Your understanding is correct for 95.55 Mick. Not real sure with 95.32 I could hunt up some references if you wish.
Guest GraemeM Posted December 10, 2011 Posted December 10, 2011 Your understanding is correct for 95.55 Mick. Not real sure with 95.32I could hunt up some references if you wish. That would be good thanks Mr Ahlocks. Some one like me has trouble finding their way around the regs. Graeme.
Cosmick Posted December 10, 2011 Author Posted December 10, 2011 Thanks Ahlocks, some clarification would be good, as far as I can see the only difference between 95.55 and 95.32 is the types of Aircraft they cover. The wording in each section appears to be the same except type.
ahlocks Posted December 11, 2011 Posted December 11, 2011 Bugger! I was counting on you saying "no thanks" ... Mike, the devil is in the details. There are differences in the exemptions and conditions of flight. I've not spent a lot of time trawling through 95.32 as I don't fly or own one. Hopefully someone who does will join in. Anyway..... 95.55 - Three axis, up to 45knt stall, 600kg MTOW, yadda yadda yadda.... 6 General conditions 6.1 The exemptions given by subsection 3, in relation to an aeroplane to which this Order applies, are subject to the following general conditions: (a) the aeroplane must not be used for any purpose other than: (i) private operations including glider towing but not aerial application operations; or (ii) if the aeroplane has been wholly built and assembled by a commercial manufacturer — flying training to enable a person to obtain a pilot certificate; plus this for owner builders 6.2 In spite of sub-subparagraph 6.1 (a) (ii), if a person has wholly built or assembled an aeroplane to which this Order applies, or a group of persons has wholly built or assembled such an aeroplane, then that person, or each of those persons, may use the aeroplane for their personal flying training. Usual disclaimers apply. Speak to your instructor, CFI, lawyer, etc., for proper advice. Edit: Insert links to references used http://www.comlaw.gov.au/Details/F2011L00617 - CAO95.55 http://www.comlaw.gov.au/Details/F2011L00615 - CAO95.32 http://www.raa.asn.au/opsmanual/2-15.pdf
Guernsey Posted December 11, 2011 Posted December 11, 2011 Although the last paragraph above does apply, you will find that some instructors will not instruct on an aircraft you have built yourself. Alan.
ahlocks Posted December 11, 2011 Posted December 11, 2011 Although the last paragraph above does apply, you will find that some instructors will not instruct on an aircraft you have built yourself. And that's fair enough too IMHO. I don't think I'd want to fly in something I'd built either! 2
Guernsey Posted December 11, 2011 Posted December 11, 2011 And that's fair enough too IMHO. I don't think I'd want to fly in something I'd built either! Hang on a minute Ashlocks, your avatar states that you fly a re-cycled beer can so was that factory built or built by some guy called Fosters.? Alan.
ahlocks Posted December 11, 2011 Posted December 11, 2011 Melbourne bitter... saved on having to paint it.
robinsm Posted December 11, 2011 Posted December 11, 2011 Built the Xair from a kit, completed the last half of my flight training in it. (the trainer was the test pilot).
ahlocks Posted December 11, 2011 Posted December 11, 2011 Nup.... can't find any clause that insists that 95.32 have to be factory built for training use with RAAus. anyone else keen to have a go? http://www.comlaw.gov.au/Details/F2011L00615
Cosmick Posted December 12, 2011 Author Posted December 12, 2011 Ahlocks Thanks for your input Mate 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now