Keith Page Posted May 6, 2015 Posted May 6, 2015 Thanks Andy just had to ask. Got to verify things, I am a bit twitchy I do admit it. That is good news that it is routine and not anything sinister. Regards, KP. 1
Roundsounds Posted May 6, 2015 Posted May 6, 2015 Its a routine audit. They only become non routine when you have non conformances identified and don't do anything about them...... If you Google "RAAus CASA Audit" you'll find the results of the last audit. Let's hope all of these non conformances have been satisfactorily addressed. Im pretty sure the Coroner's recommendations concerning the Gympie Spitfire accident released in Dec' 2014 and the recent Ombudsmans comments regarding CASA's response to Coroner's recommendations will have an influence on the audit focus. Again these documents can be located using Google.
slb Posted May 7, 2015 Posted May 7, 2015 The 'Jabiru-Scimitar-hub-inspection-bulletin-06052015' is on the RAA website (under the Latest News tab as well as under Technical/Airworthiness) 1
Happyflyer Posted May 7, 2015 Posted May 7, 2015 Lucky the thing didn't let go in flight. Hope it was a one off. https://www.raa.asn.au/wp-content/uploads/2015/05/Jabiru-Scimitar-hub-inspection-bulletin-06052015.pdf.pdf
SDQDI Posted May 7, 2015 Posted May 7, 2015 Ok I've been around Dazza too long...... I couldn't help but notice a small grammatical (is that a word?) error under point 2 it says 'to propeller is to be removed' but I think it should read 'the propeller is to be removed' Yes yes I know it doesn't matter but after all they had a few extra days to check it:stirrer: Ok I'm off to troll somewhere else. Ps not a nice looking crack.
SDQDI Posted May 7, 2015 Posted May 7, 2015 Show me a nice looking crack... Ok I know I said I wouldn't post a nice crack but after seeing this one I couldn't resist, not that it's a nice one but just because of the sheer novelty factor............ 1 2 1
Russ Posted May 11, 2015 Posted May 11, 2015 I see the Raa has issued ( finally ) the " advice " for inspections. The way I'm reading this, it's a one off check, surely this can't be right. Strange logic.
jetjr Posted May 11, 2015 Posted May 11, 2015 Id say theres a Jabiru one following Importantly this RAA is "before next flight" inspection
Happyflyer Posted May 11, 2015 Posted May 11, 2015 Every where I look in the RAA bulletin it says "ADVISORY", nowhere does it say "MANDATORY" which is the usual word in urgent company service bulletins and AD's. This seems a mattter that could have very serious consequences, surely it should be mandatory and very clearly stated so in the notice? Is this mandatory or not?
Keenaviator Posted May 11, 2015 Posted May 11, 2015 I am running one of these props and so far it is performing well. I certainly will be checking it before the next flight. This prop hub is forged and apparently a very good way to go for structural integrity - maintaining the grain of the metal. I hope the small holes used for the roll pins that lock the pitch to a factory standard are not causing a stress point. Interestingly I also used a Patroney composite prop on my Corby Starlet. The hub of the Patroney prop is a soft grade of aluminium and was machined by Camit. I've never heard of issues with Paul's props and mine was a beauty and is still going well with the new owner who has put a lot more hours on it than I did.
Russ Posted January 17, 2016 Posted January 17, 2016 Heard recently, that a"jab" composite prop blade....(blade only) had shown cracking, done around 400+hrs. Any others ?? or is this just a beatup.??
frank marriott Posted January 17, 2016 Posted January 17, 2016 Heard recently, that a"jab" composite prop blade....(blade only) had shown cracking, done around 400+hrs. Any others ?? or is this just a beatup.?? Russ The two that I know of were installed by someone who should still be playing in a sand-pit with toy cars and not touching an aeroplane - maybe not related to what you are referring to.
jetjr Posted January 17, 2016 Posted January 17, 2016 Havent heard of blade cracking, only the hub and it was installed wrong. Bolly make the blades to Jab spec, very similar design the their own but done in fibreglass not Carbon fibre.
Keenaviator Posted January 17, 2016 Posted January 17, 2016 Havent heard of blade cracking, only the hub and it was installed wrong.Bolly make the blades to Jab spec, very similar design the their own but done in fibreglass not Carbon fibre. Jab blades are not carbon fibre.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now