Rodr Posted July 9, 2015 Share Posted July 9, 2015 anyone know of a spinner manufacturer in Aus that could build a small spinner for a wooden prop on a Rotax suitable for a replica tiger moth? 1 Link to comment Share on other sites More sharing options...
Oscar Posted July 9, 2015 Share Posted July 9, 2015 What base diameter are you looking for? I have a mould for a spinner of around 200mm base diameter - here's a piccy of a trial mould of it I made recently for my own project: 1 Link to comment Share on other sites More sharing options...
Rodr Posted July 9, 2015 Author Share Posted July 9, 2015 Thanks Oscar the diam needed is around 130mm or 5inches any larger would look odd as the moth spinner is traditionally very small like a nipple on a tit! I would place a picture of the prop here but unsure of how to do it!!! Cheers Link to comment Share on other sites More sharing options...
Oscar Posted July 9, 2015 Share Posted July 9, 2015 Bloody heck - that's not a spinner, that a proctologist's thimble.. Link to comment Share on other sites More sharing options...
skeptic36 Posted July 9, 2015 Share Posted July 9, 2015 Thanks Oscar the diam needed is around 130mm or 5inches any larger would look odd as the moth spinner is traditionally very small like a nipple on a tit!I would place a picture of the prop here but unsure of how to do it!!! Cheers Click on upload a file, then its self explanatory. Now I want to see that nipple on a tit you spoke of Link to comment Share on other sites More sharing options...
Rodr Posted July 9, 2015 Author Share Posted July 9, 2015 Ok this is the foundation for thr nipple on the tit! 1 Link to comment Share on other sites More sharing options...
WayneL Posted July 9, 2015 Share Posted July 9, 2015 Model Aircraft Alloy Spinners many work for you. Try this link for some ideas. http://www.desertaircraft.com.au/shop/KS-Alloy-Spinner.html?category_id=259#product-details-tab-specification Link to comment Share on other sites More sharing options...
Rodr Posted July 9, 2015 Author Share Posted July 9, 2015 Thanks Wayne I have sent a request Cheers Link to comment Share on other sites More sharing options...
Guest Maj Millard Posted July 9, 2015 Share Posted July 9, 2015 Cummins spinners do nice work using the correct metals. That a nice tiger replica there rodr. Has it flown yet...see you have the right engine in it too..... Link to comment Share on other sites More sharing options...
ruffasguts Posted July 9, 2015 Share Posted July 9, 2015 Have a sonex one which would be suitable Pm me Mick w Link to comment Share on other sites More sharing options...
Rodr Posted July 9, 2015 Author Share Posted July 9, 2015 Thanks for the info Maj hasn't flown but it's begging too , just doing the paper work . I'm not good at this Mick so how do I pm my ph 0428843062 1 Link to comment Share on other sites More sharing options...
Rodr Posted July 9, 2015 Author Share Posted July 9, 2015 Have a sonex one which would be suitable Pm meMick w G'day Mick I found this by accident I have been a member for years but only to read not to post so I don't understand the mechanics of the system if you text me your ph # I will give you a call when suitable time for you Cheers Rod 0428843062 1 Link to comment Share on other sites More sharing options...
Jabiru Phil Posted July 9, 2015 Share Posted July 9, 2015 Interesting spinner attachment on a Jab in Italy I saw recently. Phil 1 Link to comment Share on other sites More sharing options...
skeptic36 Posted July 9, 2015 Share Posted July 9, 2015 Thanks for the info Maj hasn't flown but it's begging too , just doing the paper work .I'm not good at this Mick so how do I pm my ph 0428843062 Click on the guys name, then "start a conversation Link to comment Share on other sites More sharing options...
planesmaker Posted July 9, 2015 Share Posted July 9, 2015 Very nice looking aircraft Rod. Well done. What engine ? Tom Link to comment Share on other sites More sharing options...
planesmaker Posted July 9, 2015 Share Posted July 9, 2015 Oh now I can see it, 100hp rotax. Good stuff. All the best with the test flying. Tom Link to comment Share on other sites More sharing options...
jetjr Posted July 9, 2015 Share Posted July 9, 2015 Interesting spinner attachment on a Jab in Italy I saw recently.Phil Dont touch Duc Helices, long story but prop didnt fit or work well, still owe me $2K and i returned product to them Have had failures on Jabirus Not honest people Those deflectors are bolt on fit to any spinner, 1 Link to comment Share on other sites More sharing options...
Guest Maj Millard Posted July 9, 2015 Share Posted July 9, 2015 Thanks for the info Maj hasn't flown but it's begging too , just doing the paper work .I'm not good at this Mick so how do I pm my ph 0428843062 Rodr....built one myself from scratch and test flew. Don't dilly dally ...be aggressive with a bipe they like to loose airspeed quick due draggyness, and can be reluctant to land, so keep some forward stick into them for the above reasons. Getting the motor running perfect on ground and especially in climb attitude ( fuel flow) is important, last thing you need to be worrying about during initial flights. A long grass strip is the way to go if you've got one...they like to float sometimes. Don't carry any tail heaviness if possible and don't mess around trying for wheelers initially, be happy with three pointer for a while. Make sure your engine idle is set at 1700-1800 rams...no more or it'll never land. If you don't have the experience or skill to perform flight tests then get someone who does. Looks like that one will fly very nice if GC is all good. Best of luck. Link to comment Share on other sites More sharing options...
Rodr Posted December 12, 2015 Author Share Posted December 12, 2015 Have it all sorted thanks to all 2 Link to comment Share on other sites More sharing options...
WayneL Posted December 12, 2015 Share Posted December 12, 2015 Where dif you end up getting your spinner from Rod? Wayne Link to comment Share on other sites More sharing options...
Rodr Posted December 13, 2015 Author Share Posted December 13, 2015 From Univar aircraft corp USA part no U0450279 check out there site lots of small spinners for Cessna This was just called " small Cessna spinner" Cheers Link to comment Share on other sites More sharing options...
xair1159 Posted December 13, 2015 Share Posted December 13, 2015 I may be teaching granny to suck eggs as they say, but a tip for balancing spinners:- I started out trying to hang the thing from the point using fine fishing line with a lot of messing about and not much result. Then I heard about this way...... Get a bucket of water, hold the spinner point down in the water and fill it with as much water as you can, close to the prop cut-outs. It should then float with the spinner rim level - I got high tech and propped a laser level up on bricks so it shone across it to check. Being frictionless you can make it slowly spin and if it floats at an angle, add small weights near the rim until level. I attached small washers initially with BluTac and finally with epoxy to the inside of my GRP spinner. Simple innit! Nick 2 3 1 Link to comment Share on other sites More sharing options...
Soleair Posted December 14, 2015 Share Posted December 14, 2015 Rodr, that is a beautiful aeroplane. I gather you built it - which kit was it? Or did you build from plans? Well done! Nick, great tip for spinner balance. I'm going to grab the wife's laundry bucket tomorrow. . . Bruce Link to comment Share on other sites More sharing options...
Rodr Posted December 16, 2015 Author Share Posted December 16, 2015 Rodr, that is a beautiful aeroplane. I gather you built it - which kit was it? Or did you build from plans? Well done!Nick, great tip for spinner balance. I'm going to grab the wife's laundry bucket tomorrow. . . Bruce Built from a Fisher kit R-80 tiger moth replica have just completed the 25hrs testing all good changed prop from the wood 76" to a composite ground adjustable 74" made a hellava diff in performance now 70kts at 5200rpm Rotax 912uls. Link to comment Share on other sites More sharing options...
pylon500 Posted December 17, 2015 Share Posted December 17, 2015 Would be nice to measure the Warp prop, once sorted, and carve a new wood to that setting, just to add to the scale look. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now