Kyle Communications Posted April 18, 2021 Share Posted April 18, 2021 Voltage Controlled Oscillator...its basically the main frequency control of the radio. It is the frequency driven by the PLL (Phase Locked Loop)...if the VCO or PLL dont work properly the radio is not under frequency control. The microair has a big habbit of just running off to other frequies of its own choice. 1 Link to comment Share on other sites More sharing options...
eightyknots Posted April 18, 2021 Share Posted April 18, 2021 12 hours ago, Blueadventures said: VCO? Most likely the Voltage Controlled Oscillator. 1 Link to comment Share on other sites More sharing options...
Blueadventures Posted April 18, 2021 Share Posted April 18, 2021 1 hour ago, eightyknots said: Most likely the Voltage Controlled Oscillator. OK, Is that something that the the two pots on the side allow for adjustments. My mates is up the road so distance and times prevent more troubleshooting with him. If weather is good on Thursday I'll take a fly up and change out his radio and hopefully that will show a good result (and confirm the radio is the issue) He has full rego now so can fly on trips etc. He carries a hand held for radio ops. Won't know himself when he has an operational radio. Might get get him to do a float test on the microair. Chuck it in the sea and see if it floats; if it floats good; if it sinks nogood:) Cheers. Link to comment Share on other sites More sharing options...
Kyle Communications Posted April 18, 2021 Share Posted April 18, 2021 No those pots at te side are audio stuff adjustment. The VCO is internal in the frequency design..its setup at manufacture 1 Link to comment Share on other sites More sharing options...
eightyknots Posted April 18, 2021 Share Posted April 18, 2021 25 minutes ago, Kyle Communications said: No those pots at te side are audio stuff adjustment. The VCO is internal in the frequency design..its setup at manufacture It's very unlikely that the VCO is user/owner adjustable. Link to comment Share on other sites More sharing options...
RFguy Posted April 19, 2021 Share Posted April 19, 2021 The VCO is the radio oscillator which is steered to the desired dialed frequency. Link to comment Share on other sites More sharing options...
Blueadventures Posted May 3, 2021 Share Posted May 3, 2021 Update is that today we changed out the radio to an older model micro air and give clear excellent 5/5 comms on 126.7 and 123.45 with engine at 4,800rpm on ground and using a handheld and 500 meters between aircraft and handheld. Noticed engine mount rubbers soft so will be replacing before it’s next flight. Therefore the serviced radio has some sort of issue. At least next flights will have the aircraft radio all sorted. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now