RocketShip Posted February 3, 2019 Share Posted February 3, 2019 Looking for a Corby Starlet. I have always loved this aircraft and thought I would one day build one. But I now want to own one, so someone must have one available. Please let me know? Link to comment Share on other sites More sharing options...
facthunter Posted February 6, 2019 Share Posted February 6, 2019 It's a plane that suites the small Jab motor. Usually has a Volkswagen . Not very big and always a taildragger . ALL wood.. IF you are completely on top of these you aren't a bad pilot. How are you going to be "endorsed" on it (Fully recognizing an endorsement is not a legal requirement but it's a fair question). .Nev Link to comment Share on other sites More sharing options...
Yenn Posted February 7, 2019 Share Posted February 7, 2019 I have a Corby with 2.2 Jab, which I tried to sell a few years ago. Now I have an RV4 as well and was considering selling the RV, but could let the Corby go. Facthunter has a good point, there are very few people with taildragger experience, plus a build that allows them to get comfortable in the Corby. They fly very much like an RV taildragger, but without the flaps. Where are you? My phone is 0749750209 Link to comment Share on other sites More sharing options...
kasper Posted February 7, 2019 Share Posted February 7, 2019 Yenn, you hit hit it on the head. The Corby is designed for a smaller stature person than many pilots today. I tried one on years ago and it was far too tight. Same with the sonerai. I loved flying the tipsy nipper ... but had to fly it cross armed to put my elbows into the wing roots. And the flying flea hm290 I flew cross legged with knees out the side. So Rockeship ... make sure you fit before travelling great distance to buy. Link to comment Share on other sites More sharing options...
RocketShip Posted February 8, 2019 Author Share Posted February 8, 2019 Thank for the reply's. I have about 100 hours in taildraggers, so I should be fine. Would be sure to be current with this when the time comes. Im at Redcliffe in Queensland. I have to confirm the fit, I'm 89kg and 5'10" and what I call average build. I would think that I will fit ok. Link to comment Share on other sites More sharing options...
Litespeed Posted February 8, 2019 Share Posted February 8, 2019 I reckon at that size you might be a bite o. The heavy and wide side. Link to comment Share on other sites More sharing options...
Yenn Posted February 9, 2019 Share Posted February 9, 2019 The Corby is 24" at shoulder height outside the longerons. I am 70kg and about 5"10" and fit comfortably. Not too far from Redcliffe, and I've taken the RV there for transponder inspection. Funny to see airliners going overhead at about 2000' at the aerodrome. Link to comment Share on other sites More sharing options...
RocketShip Posted February 10, 2019 Author Share Posted February 10, 2019 I have been in touch with John Corby and it looks like I will be a little on the large size for the Corby Starlet. He puts the weight at 80kg, so I think I will have to look at something else. Link to comment Share on other sites More sharing options...
Old Koreelah Posted February 10, 2019 Share Posted February 10, 2019 There was a nice wooden home-built for sale at Cessnock a few years back. An impressive French design (but not a Jodel) from a deceased estate. Worth contacting the club. Link to comment Share on other sites More sharing options...
Thirsty Posted February 17, 2019 Share Posted February 17, 2019 I have a Corby - I'm 88Kg and 5'11" and fit fine. I had to lower the seat from the previous owner but I have a couple of inches clearance above my head so all good. I am selling mine as I am not flying anywhere near as much as I should so if you're still interested give me a call. I know there are a few guys over 6' tall flying Starlets from the Yahoo group so it is doable. I flew mine back from Sydney to Adelaide which was fine. Lovely plane and I know I'm going to regret selling but it seems waste to have it just sitting there. 1 Link to comment Share on other sites More sharing options...
M61A1 Posted February 17, 2019 Share Posted February 17, 2019 I have been in touch with John Corby and it looks like I will be a little on the large size for the Corby Starlet. He puts the weight at 80kg, so I think I will have to look at something else. There is one hangared at Clifton. If you gave Trevor Bange a call you could probably organize to try it on and see if it fits. Link to comment Share on other sites More sharing options...
Thirsty Posted February 17, 2019 Share Posted February 17, 2019 Problem with that is they are all built differently. You need to sit in the one you want to buy I reckon. Link to comment Share on other sites More sharing options...
Yenn Posted February 18, 2019 Share Posted February 18, 2019 The design was altered to allow the bulkhead behind the seat to be moved back 2" so some of the older builds could be shorter in the seating area. Mine is to the original design. Otherwise there is not much that could be changed during building, without a lot of complication. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now