Jump to content

Recommended Posts

Posted

Wonder how many bushel to the acre they’re getting, and wonder what price per bushel?

 

This is a farmers webpage isn’t it?

 

 

  • Like 1
  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Posted

 Bushell is a volume measure and equals 8 gallons (imp). An acre is different in England 4840, Scotland 6150 and Ireland 7840 square Yards. So buy Irish land and you get more by far. Nev

 

 

  • Haha 1
Posted
 Bushell is a volume measure and equals 8 gallons (imp). An acre is different in England 4840, Scotland 6150 and Ireland 7840 square Yards. So buy Irish land and you get more by far. Nev

 

Thanks Nev,

 

Wouldn’t happen to know the price per bushel of corn would you in Ireland??

 

US farmers are suffering with the prices since my good mate Don got stuck in to China.

 

 

Posted
... An acre is different in England 4840, Scotland 6150 and Ireland 7840 square Yards. So buy Irish land and you get more by far. Nev

 

Nev they're mucking about with the natural order of things.

 

I was raised to believe an acre was the amount of land one man with an ox could plough in a day.

 

 

  • Like 2
Posted
Nev they're mucking about with the natural order of things.

 

I was raised to believe an acre was the amount of land one man with an ox could plough in a day.

 

The Irish always hitch their ploughs up after lunch.

 

 

Posted
Well there is only so much one can say about a high performance stol aircraft failing to take off and the thread drift has been interesting, but gardening that's a bit to extreme

 

 

I don't know, there's been more than a few aircraft that have used incorrectly, and went and ploughed up a few paddocks - so I can definitely see the farming and gardening links being quite appropriate.  :cheezy grin:

 

 

  • Like 2
Posted
In fact there should be a straightest furrow competition.

 

We all have straight furrows now with 2cm differential correction autosteer, I could not drive a tractor or sprayer with out it.

 

 

  • Like 1
Posted
Near here, local place names including Jim Crow Creek, Blackjack Road and Blackfellows Gate Road are subject to name- changing petitions. Councils will probably concede. The names are at least 170 years old.

 

 As long as Yorkey gets to keep his knob and I can visit Rooty Hill I’ll be right mate 

 

 

Posted

That brings us to an important point; wheat is a rooted crop, and if an aircraft is forced landed into  rooted crop the aircraft is likely to become rooted too.

 

 

  • Haha 2
Posted
 So buy Irish land and you get more by far. Nev

 

Yes ... which is the only rational reason for an ASI to read mph as opposed to knots.

 

 

Posted

Garfly, are you telling us, the Irish invented ASI's?? They couldn't possibly have!

 

If the Irish had invented ASI's, they'd read in MPH and Knots - to be sure, to be sure ...  :cheezy grin:

 

 

  • Agree 1
  • Haha 1
Posted

Not being a qualified Flight instructor, I agreed to sit with a chap ( Old friend and Business associate ) who had bought a Kitfox Mk3, which was a GA aircraft on the register.  I had over 200 Hrs on type, and the Friend had taken a tailwheel course and been signed off as competent but he asked me to fly alongside him for a few hours, for confidence building as he had never flown a Kitfox before,, and there was no local instructor who had either. . .

 

He had done his tailwheel endorsement on a Bellanca Decathlon,. . which is a much heavier airframe with a much more powerful engine,. . .But had passed anyway.

 

I flew with him for 65 hours (  Oh Yeah,. .free flying WOULDN'T YOU ? ? but I usually paid for the breakfasts ! !  ),. . .to all sorts of locations; and he alway appeared to be under-confident, even to the point of asking me to do the radio calls. ( He had passed his GA licence course in Florida a year previously, on PA 28s, and while he was there, he also did a helicopter course in a Robinson R22. . but that's another story ).

 

We got to the point were I was worried that his crosswind landing technique was non existent,. . he tried sideslipping, as taught by his american instructor and Crabbing, too, but always got it wrong. ..  I showed him how I did it,. . on several occasions, but as I said, . .I am NOT an instructor.   I said that the best thing he could do would be to approach a taildragger instructor and do it properly. .( I hate to tell people that they will never be a pilot as long as they have a hole in their bum. .  but there we are.)

 

He asked someone else from his own club for help with this, and got a real Ace in his own mind to teach him. . . .

 

I only heard about the crash a month later,. . . they had tried to land on  runway which was parallel to a 132KV national grid power line, and 90 degrees out of wind.

 

The Kitfox ended up inverted in a field full of OIL SEED RAPE ( FECK YOUR BLOODY CANOLA ) under the Power Lines.. . .   Only cuts and bruises but the aircraft was a write off. 

 

When I asked him what went so wrong, he said he was thinking about 'pulling the collective' for a go around.  ( I $hit you not, . .that is what he said )

 

If anyone accuses me of BS here, I have the A/C registration, + all the names, places etc. . .. 

 

These folks walk amongst us,. .and when they have loads of money, they can be even more dangerous,. . . 

 

 

  • Like 1
  • Haha 1
Posted
Yes ... which is the only rational reason for an ASI to read mph as opposed to knots.

 

Yanks have to have the biggest/baddest/bestest of everything. Even if it's not ?

 

 

Posted

Much better in dual MPH Knots, than just

 

Metres per second. per second, (never understood the Echo)

 

spacesailor

 

 

Posted

I've seen it used for Rail speeds. (super trains).

 

And what is the French equivalent.

 

spacesailor

 

 

Posted
Well there is only so much one can say about a high performance stol aircraft failing to take off and the thread drift has been interesting, but gardening that's a bit to extreme.? 

 

 

 

Recreational Farming ? ?

 

 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...