Jump to content

Recommended Posts

Posted

There is a page on FB for such things but it looks a bit hit and miss. Is anyone aware of somewhere to be bits and pieces? 

Posted

wal the rotax specialist at healesville would have used parts i would think.

  • Like 1
Posted

I don't think "wreckers", and "aviation safety", are two words you would really want to see in the same sentence.

  • Haha 1
Posted

Bogus Parts are a real problem in the larger aviation Industry.  You should know the HISTORY of what's put in your  motor unless it's used in a swamp boat. Even then the Gators might get you if you Linger longer.  Nev

  • Agree 1
  • Haha 2
Posted (edited)

I agree if I'm getting a fuel pump for a Boeing 737 jet engine, then maybe I should follow provenance. If however, I need the left carby throttle arm for a Rotax 912, then a simple visual inspection should suffice 😉

Edited by danny_galaga
  • Like 2
  • Agree 1
Posted
  On 16/05/2023 at 10:39 AM, danny_galaga said:

I agree if I'm getting a fuel pump for a Boeing 737 jet engine, then maybe I should follow provenance. If however, I need the left carby throttle arm for a Rotax 912, then a simple visual inspection should suffice 😉

Expand  

Just buy a new arm from local BMW dealer 🤷🏼‍♂️

  • Like 1
Posted
  On 16/05/2023 at 12:02 PM, Area-51 said:

Just buy a new arm from local BMW dealer 🤷🏼‍♂️

Expand  

Part number? I've noticed that the BMW starter is about the same as the 912 so I suspect they have a similar pricing structure for spares. If I have a part number I can easily find if it's cheaper. Or in fact see if a motorcycle wrecker has a trashed carby for cheap.

 

But I don't want to hunt around, enduring many blank stares (see my starter cable thread) only to finally find out it costs the same as getting it from aircraft spruce, where I don't have to talk to any bored employee watching the clock 😄

 

 

Posted

A lot of motorcycle write offs sit in the weather at some time. I wouldn't touch a Bing that has had water in it. (0r any other alloy carb for that matter)   You also run the risk of it having been "monstered" by some gorilla with a wrench/stillsons/hammer. Nev

Posted
  On 17/05/2023 at 12:30 AM, danny_galaga said:

Part number? I've noticed that the BMW starter is about the same as the 912 so I suspect they have a similar pricing structure for spares. If I have a part number I can easily find if it's cheaper. Or in fact see if a motorcycle wrecker has a trashed carby for cheap.

 

But I don't want to hunt around, enduring many blank stares (see my starter cable thread) only to finally find out it costs the same as getting it from aircraft spruce, where I don't have to talk to any bored employee watching the clock 😄

 

 

Expand  

You use the Californian online parts catalogues to get part numbers; their State Laws require public freely have access to this kind of vendor information.

Posted
  On 17/05/2023 at 12:40 AM, facthunter said:

A lot of motorcycle write offs sit in the weather at some time. I wouldn't touch a Bing that has had water in it. (0r any other alloy carb for that matter)   You also run the risk of it having been "monstered" by some gorilla with a wrench/stillsons/hammer. Nev

Expand  

I still think the throttle arm will pass my criterion 😉

  • Haha 1
Posted
  On 17/05/2023 at 1:02 AM, Area-51 said:

You use the Californian online parts catalogues to get part numbers; their State Laws require public freely have access to this kind of vendor information.

Expand  

Oh well. Aircraft spruce it is...

Posted
  On 17/05/2023 at 12:40 AM, facthunter said:

A lot of motorcycle write offs sit in the weather at some time. I wouldn't touch a Bing that has had water in it. (0r any other alloy carb for that matter)   You also run the risk of it having been "monstered" by some gorilla with a wrench/stillsons/hammer. Nev

Expand  

 

  On 16/05/2023 at 9:03 AM, onetrack said:

I don't think "wreckers", and "aviation safety", are two words you would really want to see in the same sentence.

Expand  

what about the graveyard in america. every part that can be reused is saved. huge spare parts warehouse that keeps a lot of older aircraft flying.

  • Like 1
  • Informative 1
Posted

The aircraft graveyard is not exactly a "wreckers yard". Everything in the aircraft graveyard is carefully protected, unlike "wreckers" where stuff stops where it drops, and gorillas with big shifters rip off the parts you want.

Plus, it's all unprotected out in the weather, and they forklift vehicles around without a great deal of care.

  • Like 1
Posted
  On 17/05/2023 at 5:18 AM, onetrack said:

The aircraft graveyard is not exactly a "wreckers yard". Everything in the aircraft graveyard is carefully protected, unlike "wreckers" where stuff stops where it drops, and gorillas with big shifters rip off the parts you want.

Plus, it's all unprotected out in the weather, and they forklift vehicles around without a great deal of care.

Expand  

a monkey wrench would work better | Monkeys funny, Funny pictures, Gas ...

  • Haha 3
Posted
  On 17/05/2023 at 5:18 AM, onetrack said:

The aircraft graveyard is not exactly a "wreckers yard". Everything in the aircraft graveyard is carefully protected, unlike "wreckers" where stuff stops where it drops, and gorillas with big shifters rip off the parts you want.

Plus, it's all unprotected out in the weather, and they forklift vehicles around without a great deal of care.

Expand  

A lot of the motorcycle wreckers I've been to have the most important stuff indoors. Different sort of scene to car wreckers. 

  • Informative 1
Posted
  On 17/05/2023 at 6:54 AM, danny_galaga said:

A lot of the motorcycle wreckers I've been to have the most important stuff indoors. Different sort of scene to car wreckers. 

Expand  

There is a YouTube video of a  car wreckers in the UK which is amazing.

They have a reverse production line where the cars are stripped and everything is tagged and shelved as it is removed. At the end of the line the body shells go off to scrap metal recycling. All the fluids are removed. Oil gets recycled. Diesel ends up in the larger fork lifts and scrap handling machines. All their smaller forklifts are electric and recharged off solar panels on the facilities roof. And the place was immaculate. Not what you normally think of .

  • Like 1
  • Informative 1
Posted
  On 17/05/2023 at 10:24 AM, BrendAn said:

There is a YouTube video of a  car wreckers in the UK which is amazing.

They have a reverse production line where the cars are stripped and everything is tagged and shelved as it is removed. At the end of the line the body shells go off to scrap metal recycling. All the fluids are removed. Oil gets recycled. Diesel ends up in the larger fork lifts and scrap handling machines. All their smaller forklifts are electric and recharged off solar panels on the facilities roof. And the place was immaculate. Not what you normally think of .

Expand  

 

  • Informative 3
Posted
  On 17/05/2023 at 5:31 AM, BrendAn said:

a monkey wrench would work better | Monkeys funny, Funny pictures, Gas ...

Expand  

That's Eddy!!! Where is he working now? Lost his number and been trying to track that bastard down for years; still owes me a set of valves...

  • Haha 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...