Boot bracket made for rudder steering rods

[Rodr]

Sometime ago someone showed a drawing design for a bracket to be made to fit the inner firewall so as to fit a rubber boot to the bracket and rudder steering rods

i   Have lost my drawing if the person sees this they made repost please!

Edited July 25, 2023 by Rodr

[Blueadventures]

Recall a method shown in Kitplanes within last two years.

[Marty_d]

I'd be interested in that too, haven't made my boots yet.

[Marty_d]

Just had a thought... Dektites!

[Rodr]

This fella drew a great diagram of how to cut and shape light al  from a vertical connection on the firewall to a round to connect the rubber boots I used Holden ones off the front end!

but I lost his drawings !

[facthunter]

Something from a brake master cylinder may work. I need an image of the part needed to be covered.  Nev

[IBob]

Attached. Join the ends and it makes an oval that sits at an angle off the firewall.
Marty, you may need to adjust a tad as the Sav S has a reduced firewall angle.

Boot Bracket.pdfFetching info...

[IBob]

[Blueadventures]

  On 25/07/2023 at 4:49 AM, Rodr said:

Sometime ago someone showed a drawing design for a bracket to be made to fit the inner firewall so as to fit a rubber boot to the bracket and rudder steering rods

i   Have lost my drawing if the person sees this they made repost please!

Expand  

Can look up Fire wall boot making on Kitplanes; they show a way to make up a silicone impregnated fibreglass mat boot and alloy bracket for fire walls.  May suit your build.

[Rodr]

Thanks IBob

     That is similar to what I was looking for this guy had it down pat to fit onto the vertical hole and to rivet into the firewall holes and protruded out into a perfect round to suit the rubber boots made by most car manufacturers? 
i lost his drawings !! 
cheers

[facthunter]

 Could you make this a fireproof thing? Surely something to consider?  Nev

[Rodr]

Thanks to all have prefabricated out of aluminium that be fine

cheers