John Raison Posted February 19, 2009 Share Posted February 19, 2009 Hi all does anyone know of anyone building a Thatchercx4 I know there are 7 sets of plans in Australia Cheers John Link to comment Share on other sites More sharing options...
Guest marquesports Posted April 11, 2011 Share Posted April 11, 2011 John, I have a set but have not done anything with them. It's a gorgeous little thing, saw it at Oshkosh a few years back. Dave Thatcher is a real gentleman. Link to comment Share on other sites More sharing options...
Riley Posted April 11, 2011 Share Posted April 11, 2011 A CX 4 Thatcher is fully built (but I believe unflown as yet) in Perth. It was offered for sale a while back but don't believe it changed hands. PM if you need more info. Link to comment Share on other sites More sharing options...
cherk Posted April 11, 2011 Share Posted April 11, 2011 Hi all does anyone know of anyone building a Thatchercx4 I know there are 7 sets of plans in AustraliaCheers John Mick Wright in Gawler is pretty close to finished by now.....haven't caught up for a while ; I have set of plans ,too many other projects on the white board at the moment 1 Link to comment Share on other sites More sharing options...
Guest Escadrille Posted July 8, 2011 Share Posted July 8, 2011 Would any one consider selling their plans to me at all? Andy Link to comment Share on other sites More sharing options...
Guest marquesports Posted August 2, 2011 Share Posted August 2, 2011 Would any one consider selling their plans to me at all?Andy Andy, At long last I have located them. You will need to contact Dave Thatcher for approval to use them as they licensed to me as the builder. If OK they are your's. Cheers. Mick Link to comment Share on other sites More sharing options...
Guest Escadrille Posted August 2, 2011 Share Posted August 2, 2011 Andy,At long last I have located them. You will need to contact Dave Thatcher for approval to use them as they licensed to me as the builder. If OK they are your's. Cheers. Mick G'day Mick. Mate that is very kind of you but I must apologise as I have bought a set from John Raison and have obtained Dave's blessing to use them( Set # 326) However thank you very much for all your efforts. Andy Link to comment Share on other sites More sharing options...
Guest marquesports Posted August 2, 2011 Share Posted August 2, 2011 G'day Mick. Mate that is very kind of you but I must apologise as I have bought a set from John Raison and have obtained Dave's blessing to use them( Set # 326) However thank you very much for all your efforts.Andy Andy, no problems, good luck and keep us posted. Link to comment Share on other sites More sharing options...
ruffasguts Posted February 15, 2012 Share Posted February 15, 2012 the first Thatcher CX4 to fly in Australia built by Mick Wright had first flight 18/01/2012 at Gawler South Aust this was the 27th in the world to fly great aeroplane stall 35knots tops out approx 120 knots Mick W Link to comment Share on other sites More sharing options...
Guest Escadrille Posted February 16, 2012 Share Posted February 16, 2012 the first Thatcher CX4 to fly in Australia built by Mick Wright had first flight 18/01/2012 at Gawler South Aust this was the 27th in the world to flygreat aeroplane stall 35knots tops out approx 120 knots Mick W Congratulations Mick! Any pictures of your baby at all? Link to comment Share on other sites More sharing options...
ruffasguts Posted February 16, 2012 Share Posted February 16, 2012 heres one a very poor vidio is on youtube (thatcher cx4 19-7872) Link to comment Share on other sites More sharing options...
ruffasguts Posted February 16, 2012 Share Posted February 16, 2012 panel of 19-7872 Link to comment Share on other sites More sharing options...
Harv Posted February 27, 2012 Share Posted February 27, 2012 Nice looking CX4. What powerplant and prop combination are you using? I assume you went with the VW? What HP? I'm also looking for a set of CX4 plans and builder manual, and any info anyone has on getting the raw stock (in Aus) as cheap as possible. I note the CX4 has a lot of Aluminium angle in it and that stuff doesnt come cheap in Aus (by my research anyway). Cheers Alex Link to comment Share on other sites More sharing options...
ruffasguts Posted February 27, 2012 Share Posted February 27, 2012 I am using 80 hp limbach 2litre (certified VW) Arrow 54 x 46 prop 6hrs flown allin cct area so performance figures not real accurate (goes Quick) all extrusions ,chrome moly ,tubing assorted hardware from Wicks other bits from Spruce and Great planes all great to deal with Considerable savings over AU prices even with frieght all sheets from Airport metals Melbourne Please purchase plans direct from David he deserves a little reward for producing them plus he is a great bloke always ready to answer emails or telephone calls Regards Mick W Link to comment Share on other sites More sharing options...
RetiredRacer Posted February 27, 2012 Share Posted February 27, 2012 My brother from the Gold Coast bought a "Quick build" kit and has started assembly. Link to comment Share on other sites More sharing options...
Harv Posted February 27, 2012 Share Posted February 27, 2012 Thanks for the update Mick. Mind if I ask how many hours you put into the build? And was it plans build or did you buy any prefab stuff? ie. wing spar.. Sounds like you've got all the 'bells and whistles'. I've run the materials list through Aircraft Spruce and Wicks and there is a fair amount of difference between the two. But, they are miles away from local Aus prices.... Anyone know why al extrusion costs so damn much in this country?? More than happy to purchase plans from David himself and agree he is on to a good thing here. I just thought I'd see if anyone had bought a set and decided not to build - give them an opportunity to recoup their outlay too. Cheers Alex 1 Link to comment Share on other sites More sharing options...
ruffasguts Posted February 28, 2012 Share Posted February 28, 2012 Thanks for the update Mick. Mind if I ask how many hours you put into the build? And was it plans build or did you buy any prefab stuff? ie. wing spar..Sounds like you've got all the 'bells and whistles'. I've run the materials list through Aircraft Spruce and Wicks and there is a fair amount of difference between the two. But, they are miles away from local Aus prices.... Anyone know why al extrusion costs so damn much in this country?? More than happy to purchase plans from David himself and agree he is on to a good thing here. I just thought I'd see if anyone had bought a set and decided not to build - give them an opportunity to recoup their outlay too. Cheers Alex Link to comment Share on other sites More sharing options...
ruffasguts Posted February 28, 2012 Share Posted February 28, 2012 fully plans built approx 2 1/2 years i did not keep a record of hours but was only worked on as a part time project airframe less engine / prop /instuments /avionics approx $10,000 Link to comment Share on other sites More sharing options...
shags_j Posted March 5, 2012 Share Posted March 5, 2012 My brother from the Gold Coast bought a "Quick build" kit and has started assembly. Where from Bob? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now