Jay
-
Posts
49 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Downloads
Blogs
Events
Store
Aircraft
Resources
Tutorials
Articles
Classifieds
Movies
Books
Community Map
Quizzes
Videos Directory
Everything posted by Jay
-
Hi Brett Just picked this up - yes, my Sonex has flown since December last ( Bunbury based ), done about 36 hours to date ; there is another Sonex close to completion , also based in Bunbury. My email is [email protected] is you want to contact I am sure this is the first to be completed and flown in WA Cheers Jay
-
The Avweb article and the Savvy Webinar both by Mike Busch push the same point ; peak EGT and max CHT occur close to one another in relation to mixture , so how to reduce CHT from a mixture perspective (only)? ; use CHT and fuel flow ( lean of peak to get economy, rich of peak to get airspeed )
-
Thanks, worthwhile reference - interesting that CHT reduction is more sensitive to leaning rather than riching mixture around peak EGT
-
Does anyone know of a good reference that describes the relationship between manifold pressure, mixture, CHT, RPM and load for a typical modern 4 stroke small aircraft engine?
-
Currently importing a part built Sonex from California, estimate around $10k for a FCL to Fremantle WA, inclusive all landed costs. Have heard around $5k for the kit, generically to OZ.
-
In the western australia we have a drought. Could use some of that water here.... how bizarre is that!
-
Anyone interested in a small syndicate in SA (south of Adelaide)
Jay replied to Thirsty's topic in AUS/NZ General Discussion
Syndicate Me too Trying to get s syndicate partner for a Sonex - $25k each required- looks like asyndicate of one as well -
Thanks all for the advice everyone - I see the isuue as not the freight, import duty etc, any freight company can do this , but rather the packing of the container ( usually required within 24 hours ), the quality of the packing re damage,checking of the inventory, the payment transaction, all at arms length. May have to get this brokered...., or get there myself...
-
Any experience out there on organising a seacontainer in the US for the Seller to pack, and commercial settlement methods bearing in mind the scams out there from 'Buyers' which will make Sellers nervous ?
-
One assembly done, 50+ to go
Jay replied to denmit's topic in Aircraft Building and Design Discussion
denmit Any idea on estimated completed $$$$ - it's ok , I am sitting down -
The Aerovee is 80 hp - in the Sonex 2 seater it is standard fit ( the Aerovee is supplied by them) , and apparantly performs well, even enough grunt for limited aeros in the US. Check the site.
-
With the USD/AUD exchange rate now , probably AUD $ 30k is a good estimate for the Onex. However may be looking at least 6 months to get testing, US accreditation and kit manufacture done. Then there is the RAAUS accreditation to do, plus a backlog factor on orders... so a long wait for those that are interested Not sure that turbo 100 hp is necessary for the Onex, may be for the Sonex?
-
If you want to train in a 'country' environment, try Bunbury Flying School or the Bunbury Aero Club, 90 mins driving from Perth
-
Same old problem every winter - we now use the technique of pulling the prop over all cylinders with full prime ( nil throttle ) to get the lighter fractions into the cylinders. So far so good , temps down to 5 deg at night already
-
Essential stuff , separates high G stall from structural failure modes, something I wasn't sensitive to
-
Question - there appears to to be no specific aerobatic endorsement for Recreational Certificates ... so how does a rec pilot get this and what rec aircraft are suitable ( I know only of the Sonex in single seat mode ) i_dunno
-
Shall I say it ? - regrettably what happens in the West is rarely reported in the East which is dominated by the usual news dominated interests located there, usually underwritten by rugby league and AFL football codes Never mind, we know who the real champions are
-
What a privilege to see the cream of the cream live - Matt Hall came from middle of the pack to almost make within a whisker - what a show , won't sleep tonight, their reactions are almost frightening
-
I'll be there Saturday - weather forecast looks pretty good
-
The Millennium ( prototype only) cruises 160kts with 209 kts VNE on a Rotax , but will cost $250k plus ( all carbon fibre, tandem seating) Still don't know how the latest plastic fantastics can get past the 120kt max rule
-
What's rain - the old timers tell me we had some in Perth last tear some time?
-
Sonex stuff - of interest to SOME may be the ONEX currently under development, a single place Arovee ( 80 HP) powered aerobatic quick build kit for abot $40k total ( my estimate )
-
Hi Stanz It is but a technological dream, beyong financial justification ( I mean 160 kts cruise, fully aerobatic, and 209 kts VNE with a Rotax! ) - check the specs - but at least we should recognise that it is achievable. At the end of the day is it a $20k ragwing that we fly or a $ 250k super plane that is only a dream , which is more important?
-
Have a look at the Sonex site where they have a comparison table with the RV-12 and others, may be of interest