Jump to content

pluessy

Members
 View Profile  See their activity

  • Posts

    130

  • Joined

  • Last visited

 Content Type 

Everything posted by pluessy

  1. pluessy
    Thanks everyone for their input. I'm thinking along the same lines, having to replace the complete sheeting. But I'm also not comfortable with a prop up front that can develop a hidden failure eg you don't know that the sheeting is delaminating until it is visible from the outside or is already peeling off. I have bought a Bolly BOS3 and the approval request is under way. I think a wooden prop should be covered with clear glass or varnish so that any damage to the core or cover is visible (check out the Jabiru prop manual). This GT might just become a very expensive clock
  2. pluessy
    Thanks, will try him.
  3. pluessy
    Thanks Soleair. As this is from an LSA, I was looking for someone who can sign off on this repair. I have bought and installed a Bolly BOS3, so I'm not grounded and have time to source the repair (or sell it).
  4. pluessy
    Hi everyone, I have a 2-blade fixed-pitch wooden GT propeller (from my Tecnam P92) where the fibreglass sheeting on one tip has delaminated. I had a slight vibration and some funny noise, when I checked back on the ground the glass/paint had lifted just behind the leading edge protection. Pulling on it, a 12cm section pulled off easily, see attached photos. Does anyone have any experience with this type of repair or know of a repair shop (Australia)? GT has been of no help so far, referring me to the prop manual (the prop manual states to contact the manufacturer!). Thanks for any help, Thomas
  5. pluessy
    Proud owner of a Technam P92 Eaglet
  6. pluessy
    Proud owner of a Technam P92 Eaglet
  7. pluessy
    My name is Thomas and I just joined this group. I restarted flying just over a year ago after an absence of 25 years. Now I'm building a Spacek SD-1 Minisport from a 51% kit, about 1/3 done. Once in a while I hire the ICP Savannah VG from the local RA-Aus flying school for a local flight or short trips. Looking forward to venture a bit further in the future. Cheers, Thomas
  8. pluessy
    Hiring ICP Savannah, building Spacek SD-1 Minisportfrom 51% kit
  9. pluessy
    Hiring ICP Savannah, building Spacek SD-1 Minisportfrom 51% kit
×
×
  • Create New...