Jump to content

Keenaviator

Members
 View Profile  See their activity

  • Posts

    660

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Keenaviator

  1. Keenaviator
    Ah, you know him too!
  2. Keenaviator
    I know a bloke who flies one from a 385 metre strip, fence to fence. I reckon he must have the slow flight phase pretty sorted out or he would have broken it a long time ago. He doesn't use the chute to land there either! Laurie
  3. Keenaviator
    I'm have a great wife!! Laurie
  4. Keenaviator
    This was my C-150A Texas Tail Dragger - I bought it as a tricycle, bought a conversion kit and over several years did a major overhaul on airframe turning it into a baby 180. At the same time it was given a new(er) 0200 engine, bigger wheels and brakes and several other tidy ups. I sold it to a bloke who picked it up from me at Port Augusta S.A. and took it to W.A. to fly on a cattle station. I wonder how it looks now? Registration VH-DIA. Laurie
  5. Keenaviator
    Will do Alf. Weather permitting, I'll be back next Friday just after East Sale deactivates. Doing a mixture assessment with Daryl. Cheers, Laurie
  6. Keenaviator
  7. Keenaviator
    I'll put together some photos soon.... The outside temp at 2500' I guessed since it was 18 on the ground. I found today why it has been running so rich - I checked the main jet and found it was a 255, normally fitted to a 3300. That's why the fuel flow numbers have been more like those for a 3300, not a 2200. Anyway I was given a 235 main jet to try and it seems better. I'll get the 245 main and recommended needle and needle jet for this motor asap because I wouldn't be surprised if it is fitted with those for a 3300 as well. The CHT and oil temperatures remained the same with the smaller main jet. The engine is now due for its first head tension and tappet check. Think I'll now hold off on further flying until I can get my hands on the proper needle and jets. Regarding full monitoring, I'd really like to but probably at bit hard to get past the finance minister and the moment. For now I'll stick with monitoring the theoretical hottest and leanest cylinders and checking the colour of spark plugs. Regards, Laurie
  8. Keenaviator
    I worked on ensuring a good pressure differential between the top and bottom of the motor. I shifted the oil cooler off the sump and fitted a larger Serck cooler with AN6 fittings (fitted larger fittings to the oil cooler adapter to improve flow) at the rear of the engine on the airframe instead of the engine so it is not subjected to as much vibration. This oil cooler has a naca duct with a 2" scat hose leading to it (air flow controlled by a butterfly valve that can be adjusted by the pilot). Next I reduced the size of the old oil cooler air inlet beneath the spinner (bottom of cylinders) by about 80% and fitted a close fitting duct to the sump to direct some air through the cooling fins cast into it. - this meets neatly with the air inlet below the spinner. I closed up the holes in the Jabiru cylinder cooling ducts (couldn't see much point in giving air another option other than through the cooling fins) that allow a small amount of air to bleed into the area between the top cowl and inner of part of the cylinders and crank case. I'm very happy with the results. Flying today in cool conditions around 15C at 2500' CHT was around 90C and oil temp 80C with the air shut off from the oil cooler. I opened the air valve and a short time later I saw the oil temp coming down further; closed it and it settled at 80C. Laurie.
  9. Keenaviator
    Very pleased with the way this machine has turned out. It flies straight and engine temps and pressures excellent - the under cowl mods work a treat. It's running a bit rich (exhaust pretty dark and a slight miss at WOT above 2500' that gets worse with carby heat as expected - will investigate jetting/needle position). It glides very nicely too with those long wings. Sink rate at MTOW about 400 fpm (engine off with CFI for company). Cheers, Laurie
  10. Keenaviator
    I'm sure you can Nev but the skid ball would be useless. Trikes are a bit weird in that you don't fly by attitude since you are dangling around below the wing as opposed to being part of it in 3 axis. Laurie
  11. Keenaviator
    Not in a trike. Laurie
  12. Keenaviator
    [medio=full]448[/medio]
  13. Keenaviator
    Do Jabiru cylinders break? Laurie
  14. Keenaviator
    All that was done is getting a non amphibious float plane back into the air after maintenance. They were not doing it as a stunt or thrills. Laurie
  15. Keenaviator
    Just ignorance. Laurie
  16. Keenaviator
    Welcome and also be careful if there are any fruit bat culls being carried out! Laurie
  17. Keenaviator
    I noticed while building my Jabiru UL450 that the wings were absolutely straight - no washout. The rigging of the flaps appears to be how Jabiru get the centre section of the wing to stall before the tips. The flaps are rigged a couple of degrees down while the ailerons are set at zero degrees. They are also quite specific in the rigging of the elevator, 18 degrees up and 6 down (limiting power to achieve very high angles of attack?). Do you have any experience with these Dafydd? Laurie
  18. Keenaviator
    Collective! My Cessna 150A tail dragger had this and it was very handy. Laurie
  19. Keenaviator
    Good stuff Mark! Half your luck. Laurie
  20. Keenaviator
    So you go wee wee wee wee all the way home?
  21. Keenaviator
    I've heard of the inside of the fuel line being shaved when installing onto a spigot on one of the many fittings. Sounds like you fuel flow is being restricted somewhere. Also ensure there are no kinks in the lines. Laurie
  22. Keenaviator
    Mine was a first start after 14 years. Second blade after mags turned on and yes, well inhibited. Laurie.
  23. Keenaviator
    Yep, well done Bob. I reckon I have some idea of how you are feeling at the moment too as I'm waiting for my registration to come from RAAus..... Cheers, Laurie P.S. I've just started some leave so real keen now to get the little rectangular bit of plastic (reg card) and get on with it. 25 hours within a 40nm radius of YLTV.
  24. Keenaviator
    My understanding is that intersecting angles less than 90 degrees should have a fillet to reduce drag whereas intersecting angles greater than 90 degrees don't need it. Laurie
  25. Keenaviator
    The reg number preceded by the letter N could be a clue as to where it is. That and the accent. Laurie ;)
×
×
  • Create New...