Jump to content

Marty_d

First Class Member
 View Profile  See their activity

  • Posts

    4,895

  • Joined

  • Last visited

  • Days Won

    71

 Content Type 

Everything posted by Marty_d

  1. Marty_d
    Been a while since I had a day on the plane. Today I riveted the end cap and pivot/horn plate on the starboard flaperon, riveted the pivot pin on, sleeved the rod end for the AN5-10 bolt on the bellcrank and cut the slot in the fuselage. I seem to have lost the nuts for the ball ends so will have to source those, but it moves up and down (the right way) which is a good start 🙂
  2. Marty_d
    CASA legislation may not differentiate, but I would HOPE laws around firearms and whether you're shooting at a person or a microchip would. Otherwise it's like saying that someone shooting randomly at cars on a freeway is the same as someone shooting a model car.
  3. Marty_d
    That doesn't ring right to me. If you're shooting at an aircraft you're aiming at a person, ie attempted murder or at least reckless endangerment or something. Ain't no humans in drones (yet).
  4. Marty_d
    I notice they still have the operational ones (F15/F35) roped off.
  5. Marty_d
    Definitely NOT boring. I could look at your wooden props all day, they are works of art.
  6. Marty_d
    Never seen a wing with so many fences on it before.
  7. Marty_d
    Why did they recover the dead horse? Did they have pies?
  8. Marty_d
    I was born in 1972. Looking at the 4 Aeroflot crashes, I'd hazard a guess that removing vodka from the cockpit may have helped.
  9. Marty_d
    Like the Waterford crystal factory in Ireland (I lived in County Waterford for a while). If you do the factory tour they show you people blowing glass, then you go to another room where you stand behind a rope curtain and watch half a dozen skilled workers painstakingly cutting the grooves into the crystal glasses by hand. Then you kind of think... hold on, how many sets of glasses do they sell each day worldwide? And we're supposed to believe that 3 glass-blowers and 6 people with Dremels are supplying that...?
  10. Marty_d
    Looks like a Lego plane.
  11. Marty_d
    If you're talking about the multi-strand steel cable barriers threaded through steel posts, they're more like cheese graters for motorcyclists.
  12. Marty_d
    Ummm... Why didn't one of them drive? Surely they weren't drinking...
  13. Marty_d
    It also said "Rotors: 3 blades each" while in the top pics at least, my Mk.1 eyeball clearly tells me there's 2 blades each. Bottom one shows 3 blades and a different rego / colour scheme - so they made at least 2.
  14. Marty_d
    I reckon if you're pulling the guts out of a van you'd want to put in some steel frames anyway, much as Skippy did.
  15. Marty_d
    I figured that. Just looked funny on the trailer with wings out.
  16. Marty_d
    You didn't worry about her lifting off when you got to highway speeds Bernie? 😁
  17. Marty_d
    That's a lovely colour scheme.
  18. Marty_d
    Didn't our current monarch drive one of them off a runway once?
  19. Marty_d
    Is True airspeed indicated on any instruments or just calculated / shown on GPS? (Not that it's going to make much difference in a 701 😆)
  20. Marty_d
    Even for speed cameras?
  21. Marty_d
    Used to be, you could be certain of a "buffer" (usually 10%) where they wouldn't pull you over. So doing 106 in a 100 zone was pretty safe. I think the rot set in with Victoria first, pulling people over for 1 or 2 km/h over the limit. Now here in Tassie there's "Over is over" signs all over the highways promising zero tolerance.
  22. Marty_d

    Aeronca C-3

    Marty_d commented on red750's aircraft in Recreational (3 Axis)

    Not a fan of the look.
  23. Marty_d
    le cochon.
  24. Marty_d
    Looks like the love child of an AN2 and a Lysander.
  25. Marty_d

    Oil tank hatch

    Marty_d replied to Red's topic in Skyranger

    I had the same questions Red. Ended up making my own, worked pretty well. https://www.recreationalflying.com/forums/topic/28196-marty-ds-ch-701-build-log/?do=findComment&comment=541949&_rid=2988
×
×
  • Create New...