Jump to content

ozzietriker

Members
 View Profile  See their activity

  • Posts

    183

  • Joined

  • Last visited

 Content Type 

Everything posted by ozzietriker

  1. ozzietriker
    G’day All, Does anyone have experience with the Lynx intercom/headset system? I have very weak/distorted sidetone and suspect it the batteries. Apparently they are 6V 450mAh Ni-Mh. I’m not able to source anything through Jaycar/BatteryWorld, has anyone been successful with replacing their headset batteries? thanks in advance!
  2. ozzietriker
    Hey Flyboy, many thanks for the tips! I’ll try that out.
  3. ozzietriker
    G’day Radio Guru’s, I have a Microair 760 Radio fitted to a gyro which is working fine with a Lynx Intercom system. I do however get an annoying momentary (1 second) loud high pitched tone through the headset the moment I turn the radio on. After which it goes away and the radio functions fine. Is this normal? And for comparison, are there any Microair 760 owners here that experience the same thing? thanks in advance!
  4. ozzietriker
    G'day Aviators, Does anyone use Lynx Headsets? if so, do you also use a battery charger? and which type do you use? i've learned that these headsets have internal batteries which power amplifier circuits for sidetone and the mic and may require periodic charging. One of my headsets has low sidetone so I think I may have killed my battery from neglect over 8 years of not placing it on-charge between flights 😞 Additionally - has anyone ever replaced these batteries before? Any info would be greatly appreciated. Cheers.
  5. ozzietriker
    Thanks Scott & much appreciated.
  6. ozzietriker
    Does anyone know where I can buy Aeroshell Sports Plus 4 oil in SE QLD? Thanks in advance :)
  7. ozzietriker
    Thanks again Onetrack & good to know.
  8. ozzietriker
    Hi Onetrack, Thanks very much for taking the time out of your day to write such a probing & detailed reply. These links are really helpful and I should most definitely be able to source something. Really appreciated and have a great day! Andrew
  9. ozzietriker
    Thanks Flyboy :)
  10. ozzietriker
    G’day Aviators, could someone here please tell me where I can buy silent blocks? Pictures attached. I have one that’s worse for wear. Any information would be appreciated. cheers, Andrew
  11. ozzietriker
    Hi Ian, Thanks very much for your reply! i've just sent you a PM. Cheers, Andrew
  12. ozzietriker
    Hi Spacesailor, thanks & good question - yes it would definitely go down the wall of a shed (picture attached with dimensions). cheers
  13. ozzietriker
    Hi All, Looking for some help. I'm planning a trip to Airlie Beach (departing Brisbane) in late September and seeking some temporary hangarage for my Gyrocopter (approx 3 weeks) somewhere that's near to Airlie Beach. Shute Harbour, Prosperpine and Bowen Airfields come to mind and I would be so grateful if someone could help me out with a small corner of a hangar. I'm obviously happy to pay a reward in return :) Thanks in advance! Ozi
  14. ozzietriker
    Thanks for all the constructive feedback gents, I really appreciate it - tailwinds 🙂
  15. ozzietriker
    Thanks Onetrack for your feedback and much appreciated mate, I generally replace all my zip ties annually so it's not a problem 🙂
  16. ozzietriker
    Hey thanks Downunder and that's great to hear. Yes the ceramic coating is holding well so far also thanks, it was well worth the $300 investment.
  17. ozzietriker
    Thanks for the feedback and that's great to hear 🙂
  18. ozzietriker
    Hi All, I'd love to hear anyones experience and any feedback good or bad regarding silicone hoses used on Rotax 912ULS engine and whether if this is appropriate? I recently completed a Rotax 5 year rubber replacement on my engine and replaced the one inch stiff ribbed style hose with a silicone one inch heater hose. This silicone hose flex (refer to pictures) easily meets/exceeds the temperature and pressure requirements of this system and there are no kinks when hot or cold. I would love to hear anyones opinions/feedback on whether if this was a good idea or not. Thanks in advance! Andrew
  19. ozzietriker
    Thanks very much everyone for your replies & I appreciate it! tailwinds :)
  20. ozzietriker
    Hi all, Can anyone tell me where I could buy Loctite Anti Seize 8151 (or equivilent) for use on muffler ball joints on a Rotax 912ULS exhaust? I was hoping to source some locally in Brisbane CBD area. Thanks in advance :)
  21. ozzietriker
    no Skippy - i'm well and truly inland.
  22. ozzietriker
    Onetrack, it's purely for surface protection and good looks. Guaranteed to make the machine looking more sexy now hehe..
  23. ozzietriker
    Thanks for the suggestion Onetrack :)
  24. ozzietriker
    Thanks Skippy
  25. ozzietriker
    Thanks Skippydiesel for that suggestion and i'll be sure to check it out :)
×
×
  • Create New...