compsci
-
Posts
43 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Downloads
Blogs
Events
Store
Aircraft
Resources
Tutorials
Articles
Classifieds
Movies
Books
Community Map
Quizzes
Videos Directory
Everything posted by compsci
-
I realize that there was a thread on this topic in 2008, but maybe there is now more experience with landing the Jabiru J230. I make normal (and very good) landings with a final approach speed of 65 knots with 20 to 30 degrees of flaps. However, I am having difficulty landing a J230 on fields less than 2500 feet. I would appreciate advice that included final approach speeds and flap setting, etc. I have been told by instructors (with no Jabiru experience) to use some power with high pitch on final. In essence drag it in.
-
Thank you for your responses. However, the new rotor replacement (in the U.S.) are of poorer quality than the GB73 Bosch rotor. I may have been able to order the Bosch rotor from an Australian company. My question: is there a good replacement for the Bosch GB73? rotors?
-
In the U.S. we have been told that the original rotors are no longer available. The new replacement rotors are too loose and are unacceptable. Is this a known problem and if so is there a known solution?
-
It is not unusual for the tanks of the J230 to drain unequally. However, I suspect that having one tank drain completely is an indication of a problem. I suggest that you contact Pete ( who is very knowledgeable about JABIRU) at JABIRU USA for his response. I have a 2009 J230 and live in a suburb north of Chicago.
-
J230SP -- Windshield Defogging, Rosen visors, Pedal Extensions
compsci replied to John Womer's topic in Jabiru
Correction: The site is called "Jabiru Owners" and the correct site id is: http://www.jabiru.flyer.co.uk/ -
J230SP -- Windshield Defogging, Rosen visors, Pedal Extensions
compsci replied to John Womer's topic in Jabiru
The sun shade that I installed covers the width of the front wind screen and is about 41/2 inches deep. The site in England that sells them is called "Jabiru Pilots" and can be reached by clicking on the site id below. http://www.jabiru.flyer.co.uk/http:/ -
J230SP -- Windshield Defogging, Rosen visors, Pedal Extensions
compsci replied to John Womer's topic in Jabiru
1. I don't think that at Five Feet eight inches you will have any problem reaching the pedals. You may want to add more foam inside the seat cushion; I did. You can get rudder pedals that can be extended about 2 inches. I am 5 ft. 7 inches and do not use the installed pedal extension. 2. I recently purchased and installed sun screen from a Jabiru site in England. They also cover only about 40 % but seem to work well. Total cost including shipping was about $65. 3. I have not had a problem with front windscreen fogging in my J230. -
I have a TRUTRAK autopilot which was installed in my J230 as an option when I purchased the plane two years ago in the USA. It is linked to my GPS. It has worked well and makes long flights more enjoyable. It does not work well in moderate turbulance.
-
The door braket that holds the strap that keeps the door from swinging open too far has come somewhat loose. I know that it must be repaired from inside the door frame but do not know how to do this. Has anyone had the same experience repairing this bracket? Compsci Oh, by the way...G'day
-
U.S. pilots have been following the flood tragedy and can feel your pain of losing aircraft and other property to the flood waters. We are thinking of you and pray for dry weather. CompSci
-
I would appy but the commute using my J230 from Chicago, Illinois, USA is a bit long...
-
Free Iridium plugs JETJR was the first to respond and I will be sending the plugs to him. COMPSCI
-
Free 12 mew Iridium plugs to a deserving Australian Gentlemen, I had bought 12 Iridium plugs to be installed during my annual J230 inspection, but the mechanic recommended not to use them. I would be happy to mail them to an Australian Jabiru owner in appreciation for all the good advice I have received over the past year. COMPSCI Wilmette, Illinois, USA
-
I removed each of the three units and placed the filters on the data cables. I placed them as close to the units as possible. I put filters on each of the three cables connected to the primary EFIS unit; one filter on the cable connected to the other EFIS unit and two or three onto the EIS cables. Actually I did this three weeks ago but weather, a stuck hangar door and a trip to Florida delayed the flight test.
-
I installed ferrite filters on all data cables to both EFIS units and the EIS The EFIS and EIS are manufactured by Grand Rapids Technology. I flew for over 90 minutes today without any false warning due to RF spikes. That is .... no false warnings! Before installing the ferrite filters I would get many, many false warnings. Generally four or five a minute. This is only the first flight after installing the filters so it may be too early to declare that the problem is solved, but the change was certainly dramatic.
-
Derby, I'm somewhat confused about changing the gap on the D9EIX Iridium plugs. It appears that the post is very fragile and easily broken. Also there are comments about the need for a larger than specified gap. Did you change the gap according to the 3300 engine manual or did you install them out of the box? I have now purchased 12 D9EIX plugs and plan to install them at the 100 hour inspection. CompSi
-
After reading the comments about iridium plugs I ordered 12 of them. I would like to get confirmation on your statement about not changing the gap in accordance with the JABIRU 3300 engine manual.
-
I own a J230 and would be delighted to install a toe brake modification. I think that it is a safety issue beside being a convenience. Jabiru USA states that there is insufficient room to install toe brakes. I don't think that's true. I still push on my imaginary toe brakes in my J230.
-
Since new (August 2009) my J230 has experienced electronic spikes emanating from the the 3300 engine. Probably from the ignition system. The spikes cause a spurious warning light with an out of limit message on my EFIS such as "EGT TEMP" or "CHT TEMP". The warnings last about one second and appear often. Jabiru USA has not been able to determine the cause. Has this problem occured in Australian built J230s? has anyone had the same experience and determined the cause? For your information, U.S. built J230 use EFIS systems manufactured by Grand Rapids Technology. With your continuing help I will eventually get all the problems with my J230 corrected.:thumb_up: Compsci
-
Qwerty, In what Jabiru document does it state that the J230 (or 3300 engine) is not to be hand propped? Compsci
-
That's OK...read what Qwerty (above) called me.
-
It is a Sensenich. I miss-spelled the name of the propeller manufacturer.
-
They say....it allows for easier hand propping.
-
Senswhich installation instructions are 1. Position piston in cylinder one at the top of the cylinder. 2. Install prop at 10:00 and 4:00 o'clock. The prop stops at random positions.
