Jabby
-
Posts
72 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Downloads
Blogs
Events
Store
Aircraft
Resources
Tutorials
Articles
Classifieds
Movies
Books
Community Map
Quizzes
Videos Directory
Everything posted by Jabby
-
Hi Nickey, Sorry I'm out of town for a few days and do not have the revelent information with me.But if you email George at Matco and mention my name Mike Roche, He will tell you all you want to know about Jabiru Brakes,He will sell you the proper system for your Jabiru. Any problems, Get back to me in a few days. My email address is [email protected] Regards Mike(Jabby)
-
Hi DonC'. No, You have to fill original holes with resin and flock, and redrill four new holes, This is quite acceptable and can be certified Cheers Jabby
-
You are correct ,Jabiru USA Have been fitting these brakes from day one with excellent results.
-
Hi Emaroo, The reason they are so good is simple, They stop you quickly without fading time and time again. Matco supply you with a package which includes Axle;Calipers;Roters;Tyres; Tubes;(aircraft quality) Pipes;Fittings etc. The cost varies according to the exchange rate From about $1200 Aus to $1350Aus. They are easy to fit.and you will never worry about stopping again, We have also fitted them on a J430 and had them approved by CASA.If you require more info., Call me on 0408203362. Cheers Jabby
-
Just an update on the fitting Matco brakes to the Jabiru's.We now have certification for these so they can be fitted to factory built aircraft and still carry out training etc. It's a good time to purchase Matco at the moment whilst the Aussie Dollar is so strong.I can order you the correct kit to fit any Jabiru and have them sent to you direct,Or we can arrange to have them fitted and certified .Cheers Jabby
-
Jabiru Brakes Hi Guys Sorry for not replying sooner. I am at present travelling round Australia and sometimes do not have service. However you want to know more about these fab brakes. Basically you buy the whole kit which includes tyres tubes wheels calipers discs fittings and pipes They cost us about $1300 Aus delivered to your door.If you have any questions email George @ Matco mfg and mention my name (Mike Roche) He will be more than helpful.I d'nt have any part Nos with me unfortunately You w'nt regret.Cheers Mike (Jabby) PS You can try calling me on 0408203362 for more info.
-
Brakes Hi Andys@Coffs, From experience I can tell you not to waste your money on a second set of calipers. Go to Matco and get a proper set of brakes. I have ordered six sets for my mates at Cessnock and are all extremely happy Cheers jabby
-
Hi:hittinghead: Storchy Neil, I like your style my old mate, You tell "em.Talk to you soon Mike (Jabby)
-
Hi guys, As most of you sometime or another have had trouble with your brakes, lets face it they are not the best brakes on the planet. I have found a very good alternative Matco Brakes. These are very simple to install as you get the whole kit. Includes axles,wheels, tyres tubes,calipers discs and pipes & fittings. You use your own Master cylinder,or you can,if wish use heel or toe setup. Any one interested call me on 0408203362 or email amroche@iinet .net.au Thanks Guys Jabby:clap:
-
So who went to Natfly & NatFly Reports?
Jabby replied to wanabigaplane's topic in AUS/NZ General Discussion
Natfly temora Hi Guys Jabby was there also. I spent most of my time building the Wallaby with Storchy Neil It was started an taxied on Sunday evening. A great effort. Good work Neil. I would also like to comment on the Jabiru award at the dinner I thought homebuilt planes were 19 registered and not 24 which was on the aircraft who won Happy Flying Jabby:clap: -
Flying to Broken Hill but my ASIC hasn't arrived yet
Jabby replied to Mikey_A's topic in AUS/NZ General Discussion
Broken Hill Hi Guys I flew into Broken Hill A few weeks ago, The airport was deserted. There is an unlocked gate next to the Aeroclub and plenty of fuel at the BP bowser. Happy Flying Jabby -
Natfly temora Hi Cassa, I think you are doing a wonderful job,pity we hav'nt a few more like you, willing to help Cheers Jabby
-
Cold starting a Jabiru Hi Guys, I have found a device in Europe, A carby heater which is screwed onto the outside of the carby and heats the butterfly when switched on, I have no problems with starting or carby ice. I can get you one for about $230.depending on exchange rate. Cheers Jabby:cool:
-
Re PLB's Hi Ian, I've been away for a few weeks,Hope I'm not too late to get a plb. Please let me know the procedure for payment etc., You can contact me on 0408203362 Thanks again And congrats on your recent appointment to RAA Cheers Jabby
-
Two planes down in NSW Hi Turboplanner, Yes I know the unfortunate gentleman. He actually bought my share in the syndicate a few months ago and has been going very well up to now. I think his pride has suffered a big blow, but he will get over it. Just goes to show how strong these little Jabs are.Happy Flying Cheers Jabby
-
Two planes down in nsw Hi guys sorry for delay I've been away, In answer to your question I've been told that it had full flaps activated.Damage is one wing demolished ,Elevator torn off. Front leg broken at clamp ,no damage to firewall that can be seen at the moment. Prop and front cowels a bit secondhand:crying:
-
Planes down in NSW For those of you who want to know, one of the aircraft was a Jab 160 at Warnervale. Stalled whilst doing a go around. Pilot is ok. Walked away. Aircraft not so lucky but repairable.Cheers Jabby:black_eye:
-
Cold Starting a Jabiru Hi all you Jabiru owners and Rotax Owners as well. I have discovered an excellent way to cold start your aircraft and also use as a carby heat. It is a device that fits onto the butterfly of your carby and heats it. It comes from overseas cold climates and elimates your existing carby heat,if you have one. Very simple to install and it really works.You can contact me here or phone me on 0408203362 for further information. Cheers Jabby
-
What did you think of the Wide Bay Airshow?
Jabby replied to slartibartfast's topic in AUS/NZ General Discussion
I think that the 2009 airshow was well below parr. the parking and camping grounds were way too far from the show. We had a stand which we paid a lot of money for and could not get our car in, but had to walk 4 ks I think it was discusting and will never go again, Mike -
I own a J160 and I have just flown almost around Australia in the past three weeks 7200 mls in fact We went from Cessnock To Darwin down the west coast to Perth along the South coast and back to Cessnock What a wonderful trip. apart from using a few litres of oil and a lot of Fuel it never missed a beat all through the trip.
-
Hi all, Sorry I have not been in touch for the past few months.Unfortunately Ive not been very well,which ended up in bypass surgery,However I hope that I am now on the road to recovery and am looking forward to participating in future forums. Happy Flying Mike.
-
Hi Neal Thanks for the offer of the Floaties, I will more than likely need them when I start learning to land on water, Have a good day Mike
-
Hi Carl, Unfortunately I have not been able to water the Storch anywhere at the moment as I do not have a float endorsement,and anyway I am improving the brakes at the moment for ground use, which is the only way we can fly for the present.Please come along to one of our meetings at Cessnock, I will let you know when I will be at the next one as unfortunately I will be away for the Feb and March meetings. You can phone me anytime on 0408203362 Cheers Mike
-
Hi Guys, I have heard that in the near future an Airpark is being planned for Cessnock, might be a bit hot in the Summer but has plenty wineries nearby to quench your thirst Mike
-
Hi Carl, I fly a Jab From Warnervale and am a member of the Central Coast Flying Club. You are dead right in what you say,As far as I know there is no definate date yet for the shift, It is going to happen, but when ,depends on wyong council allowing Mirvac permission to build on Warnervale. I also have access to a Storch ( thats the Italian one) with floats at Cessnock, All I need is a float endorsement, If anybody can help I would be extremley happy. Happy flying Mike